Central Oregon · Bend
Awnings in Bend, Oregon, built for the high desert
Rose City Awning & Flag has been building shade for Bend homes and businesses for decades: retractable awnings, motorized screens, patio covers and storefront awnings, made in our own shop, with a Bend team that works with clients across Bend and Redmond.
- Bend teamWorking with Bend and Redmond clients
- DecadesShading Central Oregon homes
- LicensedOregon CCB #202531, bonded & insured
Bend’s Old Mill District and the Deschutes River
Bend awnings, answered
Who installs awnings in Bend, Oregon?
Rose City Awning & Flag has built and installed awnings for Bend homes and businesses for decades, and our Bend team works with clients across Bend and Redmond. We make retractable awnings, motorized and solar screens, patio covers, window and door awnings and storefront awnings, then install them with fabrics, frames and wind sensors chosen for Central Oregon’s sun, wind and snow.
A summer day on a Bend deck
Locals know the “300 days of sunshine” line is more marketing than meteorology. What’s real is how much a high-desert day changes between breakfast and dark, and the right awning changes with it.
7 a.m.
Crisp and clear
High-desert mornings start cool, even in July. A retractable awning stays rolled up so the deck gets the early sun.
Retractable awningsNoon
Sun at 3,600 feet
Bend sits about 3,600 feet up, where thinner air lets more UV through. Solution-dyed fabric shades the deck and the glass behind it.
Patio & deck awnings3 p.m.
The afternoon wind
Gusts come up across the high desert. A Somfy wind sensor retracts a motorized awning on its own, and zip screens hold their fabric in side tracks.
Motorized screens6 p.m.
Low sun over the Cascades
A west-facing deck takes the evening sun straight in, under any roof. Exterior solar screens cut the glare and heat, and you still see the mountains through them.
Solar screens9 p.m.
Cold desert night
Temperatures fall fast after sunset. Screens close in a covered patio against the breeze and the bugs, so dinner outside runs later.
Patio enclosures
Every awning service, for Bend
West-side decks, east-side patios, cabins and downtown storefronts: whatever needs shade, we build it and install it.
Retractable awnings
Roll out for afternoon shade, roll in for wind and snow. Somfy motor and remote, or a hand crank.
Motorized & solar screens
Zip, drop and exterior solar screens for west-facing glass and windy patios.
Patio & deck awnings
Retractable, fixed or free-standing shade, sized to your deck or patio.
Patio covers & canopies
Fixed fabric covers and canopies that stay up through the season.
Patio enclosures
Motorized screens that close in a covered patio for cool evenings.
Window & door awnings
Fabric and aluminum awnings that keep afternoon sun off the glass.
Metal awnings
Aluminum or steel, holding snow, hail and sleet with very little upkeep.
Commercial awnings & graphics
Storefront, restaurant and patio awnings, with lettering and logos applied in our shop.
Repair & Recover
New fabric, motors and fixes, including awnings another company installed.
Built for all four Bend seasons
An awning in Bend sees July sun, January snow and everything between. Here’s how each one is handled.
Winter
Snow
Retract a retractable awning for winter. Fixed covers and aluminum awnings are designed for the snow load Oregon sets for your address.
Spring
Wind and storms
A wind sensor pulls a motorized awning in when gusts pick up. Zip screens stay in their side tracks.
Summer
Sun and UV
Solution-dyed Sunbrella and Tempotest fabrics hold their color under strong high-altitude sun.
Fall
Needles and dust
Ponderosa needles and fine dust settle on fabric. Brush it off and rinse with a hose; mild soap for anything stubborn.
From our shop to your Bend home
Our Bend team works with you in Central Oregon; our Portland shop sews and welds the awning. That’s how we’ve served Bend customers for decades.
Our shopNW Nela St, Portland
Over the Cascades
Your home or businessBend, Oregon
- 1
Send photos
Wide shots of the wall and the space, plus rough measurements, are often enough for a ballpark, wherever you are in Bend or Redmond.
- 2
Plan it with our Bend team
Our Bend team confirms measurements, the mounting surface and which way the deck faces, then helps you settle the fabric and controls.
- 3
Built in our shop
Frames are welded and covers sewn in our NW Portland shop. Retractables are SummerSpace systems sized to your opening.
- 4
Installed by our crew
The crew sets the limit switches and wind sensor and shows you how everything works. Your specs stay on file for a future recover.
Permits, HOAs and the Deschutes
Many awning projects are simple. Bigger patio covers, wired motors, riverfront lots and HOA neighborhoods add steps, and we’ll tell you what your project needs before you order.
Rules summarized from the City of Bend, Sunriver Owners Association and Deschutes County. Always confirm with them for your address.
City of Bend
Patio covers and pergolas
A patio cover or pergola over 12 feet high or larger than 200 square feet needs a building permit. Wiring a motor or lights into the house adds an electrical permit.
City of Bend permit guideAlong the river
Waterway and historic areas
Lots in the Waterway Overlay Zone along the Deschutes River and Tumalo Creek, and homes in Bend’s historic districts, have extra standards to meet.
Waterway Overlay Zone codeHOAs
Design review
Many Central Oregon communities review exterior changes. In Sunriver, the Design Committee has to approve them in writing first. Check your CC&Rs before you order.
Sunriver project submittalsOutside city limits
Deschutes County
Rural addresses outside Bend’s city limits go through Deschutes County building codes instead of the city.
Deschutes County building codes
What customers say
In their words
“We had a challenging situation: high elevation and lots of wind while trying to protect our view. Eric and crew listened to our concerns and designed an awning that did the job.”
“Our home is southern facing and we needed a solution to protect our hard wood floors, furniture etc from the sun.”
“Great awnings, after living with them for a couple seasons I can confidently report they have transformed our deck.”
Bend awning questions
Does Rose City Awning install awnings in Bend, Oregon?
Yes. Rose City Awning & Flag has served Bend homeowners and businesses for decades, and our Bend team works with clients across Bend and Redmond. Awnings, screens and covers are built in our own shop, so you deal with the company that makes your awning, start to finish.
Do I need a permit for an awning or patio cover in Bend?
In the City of Bend, a patio cover or pergola needs a building permit if it’s over 12 feet high or larger than 200 square feet, and wiring a motor or lights into the house needs an electrical permit. Riverfront lots in the Waterway Overlay Zone, historic districts and HOA neighborhoods can add steps. We’ll tell you what your project needs before you order.
Can a retractable awning handle Bend’s afternoon wind?
Yes, with the right setup. A motorized retractable with a Somfy wind sensor pulls itself in when gusts pick up, even when no one is home. On exposed decks we design the awning around the wind from the start, and zip screens, which hold their fabric in side tracks, are another option.
What happens to an awning during a Bend winter?
Retract a retractable awning for winter and it stays protected in its housing. Fixed covers and aluminum awnings stay up year-round and are designed for the snow load Oregon sets for your address. Aluminum awnings hold up to snow, hail and sleet with very little upkeep.
Which awning fabric holds up best in Central Oregon sun?
Solution-dyed acrylics like Sunbrella and Tempotest, which we sew and install, hold their color under strong high-altitude sun. Brush off pine needles and dust and rinse with a hose to keep them looking good.
Do you install awnings in Redmond?
Yes. Our Bend team works with clients in Redmond as well as Bend. Redmond’s residential permit exemptions include window awnings supported by an exterior wall that project no more than 54 inches without extra support, and porch covers up to 200 square feet supported by an exterior wall. For anything larger, check with the Redmond Building Division for anything larger. For Sisters, Sunriver or elsewhere in Central Oregon, call the shop at (503) 226-2761 and we’ll talk through your project.
How much does an awning cost in Bend?
It depends on size, projection, frame, fabric, motorization and how it mounts, so we quote each project individually after a free consultation. Wide photos and rough measurements are often enough for a ballpark first.
Can you repair an awning another company installed in Bend?
Yes. We repair and recover awnings no matter who installed them: new fabric, motors, adjustments and fixes. Send photos of the awning and the problem and we’ll tell you what it likely needs.
Get a Bend awning estimate
Send wide photos of the wall and the space you want shaded, plus rough measurements. That’s often enough for a ballpark before anyone drives over the mountains.
- Call
- (503) 226-2761
- Showroom
- 2728 NW Nela St, Portland
Send us your project
Photos and rough measurements are often enough for a ballpark.
